| Tuairisgeul | Tubing coil stàilinn gun staoin | ||
| Stuth & Inbhe & Meud | Stuth: 201,202,301,304,304L,310S,316,316L,321,347 Coitcheann: ASTM (ASME) SA / A312 / A213 / A269, DIN, JIS, EN | ||
| Trast-thomhas a-muigh: Φ6mm-25mm Tighead balla: Φ0.7mm-2.11mm Fulangas: OD: ± 0.08mm, WT: ± 10% | |||
| Fad | A rèir diofar mheudan, tha an aon fhaid coil taobh a-staigh 500 meatair chan eil an tiùb coil gu lèir na phuing tàthaidh | ||
| Làimhseachadh uachdar | Piocadh neo Pòlainneach Annealed | ||
| Teicnigeach | Rolladh fuar an toiseach, an uairsin coil fuar air a tharraing | ||
| Seòrsa Lìbhrigeadh | Bog | ||
| Seòrsa | Gun fhiosta agus Welde | ||
| Iarrtas | Tha tubing coil stàilinn gun staoin air a chleachdadh gu farsaing ann an drileadh ola, ceimigeach, gnìomhachas cinneasachadh steamship, iomlaid teas agus fuarachadh gnìomhachas ceimigeach condenser, loidhne-phìoban gas msaa. | ||
Ìre stàilinn gun staoin
| Co-dhèanamh ceimigeach | Stuth-sgrìobhaidh | 201 | 304L | 304 | 316 | 316L |
| C | ≤0.15 | ≤0.03 | ≤0.08 | ≤0.08 | ≤0.03 | |
| Si | ≤1.00 | ≤1.00 | ≤1.00 | ≤1.00 | ≤1.00 | |
| Mn | 5.5-7.5 | 7.5-10 | ≤2.00 | ≤2.00 | ≤2.00 | |
| P | ≤0.06 | ≤0.035 | ≤0.035 | ≤0.035 | ≤0.035 | |
| S | ≤0.03 | ≤0.03 | ≤0.03 | ≤0.03 | ≤0.03 | |
| Cr | 16-18 | 18-20 | 18-20 | 16-18 | 16-18 | |
| Ni | 3.5-5.5 | 8-12 | 8-10,5 | 10-14 | 10-14 | |
| Mo | 2.0-3.0 | 2.0-3.0 | ||||
| Seilbh Meacanaigeach | Stuth Stuth | 201 | 304L | 304 | 316 | |
| Neart tensile | ≥535 | ≥520 | ≥520 | ≥520 | ||
| Neart toraidh | ≥245 | ≥205 | ≥205 | ≥205 | ||
| Leudachadh | ≥30% | ≥40% | ≥35% | ≥35% | ||
| cruas (HV) | <253 | <200 | <200 | <200 | ||
Ùine puist: Faoilleach-20-2023